General application of ABS plastic board: the application scope of ABS plastic board is very large, mainly including automobile, electronic devices and decorative building materials. The application of automobile industry includes instrument panel, body panel, interior decoration panel, steering wheel, sound insulation material, anti-theft lock, bumper, ventilation pipe and other components. At the level of electronic devices, it is widely used in refrigerators, TV sets, automatic washing machines, central air conditioners, computers, printers and other electronic products. In the decorative building materials industry, ABS pipe fittings, ABS sanitary ware, ABS decorative panel are widely used in the decoration industry. ABS board is also widely used in packaging, furniture, sports and cultural entertainment products, machinery and equipment manufacturing industry.

What is ABS flame retardant board? Where is ABS flame retardant board suitable for use? ABS flame-retardant board (also known as flame-retardant board, flame-retardant wood-based panel) is a new type of building decoration materials. The key is to carry out decoration design in the area of induced abortion gathering, which is more cost-effective than traditional solid wood board and wooden control panel, and the actual effect of flame-retardant is also better. It is very in line with the requirements to specify high flame-retardant characteristics for the area of induced abortion gathering.

Compatibility and heat insulation, PMMA's heat insulation is better than ABS's, some manufacturers of ABS will add tackifier (Plasticizer) in its secret recipe, if the selection of tackifier is not good, it will be harmful to the body

Acrylonitrile butadiene styrene (ABS) is a kind of general thermoplastic engineering plastics. Its specific properties are as follows: the appearance of ABS engineering plastics is opaque and ivory colored granules, and its products can be made into colorful products with high gloss. The relative density of ABS is about 1.05, and the water absorption is low. ABS has good adhesion with other materials and is easy to be printed, coated and plated. The limiting oxygen index (LOI) of ABS is 18% ~ 20%. It is a flammable polymer with yellow flame, black smoke and special cinnamon flavor.

What raw materials are used in ABS composite board? Plastic or resin? The raw materials used in ABS composite board can be divided into ABS resin and ABS plastic. Among them, ABS plastic is the product of ABS resin. ABS resin is composed of acrylonitrile (Pan), butadiene (PB), butadiene (PS) three single mixture, the English name is acrylonitrile butadiene styrene, commonly known as ABS. ABS plastic is a kind of engineering project plastic after modified material (adding preservative or aluminum alloy) to improve the properties of ABS resin.

Standard specifications and standards of plastic ABS flame retardant board: 1. Fire safety grade ABS flame retardant board: ABS flame retardant board belongs to Hb grade according to UL94 specification. ABS ignites faster when it is on fire, and releases a lot of poisonous gas and black smoke from exhaust pipe, which is unfavorable for specific application. With the improvement of scientific and technological innovation and quality of life, people's awareness of prevention is becoming stronger and stronger. Countries all over the world have clearly put forward strict fire safety and flame retardant regulations for plastic materials used in cars, engineering buildings, electrical products, office equipment, etc., and formulated relative standards and norms. Therefore, the scientific research on ABS flame retardant board has a very important practical significance.

Many people know that PC material is a kind of product with high transparency and has the reputation of "transparent metal", so it is easy to find the appearance problems of PC plastic products. One of the common is cracks, in order to avoid cracks in PC plastic products, let's understand the methods and skills, learn these methods!

Because the grinding force in the process of PC injection molding under certain conditions will lead to the quenching stress and the network carbonization structure is easy to crack. At this time, we can use the heat treatment technology to reduce the quenching stress to a low point, so as to avoid cracking. We can reasonably use the cooling lubricant for treatment, which can not only reduce the quenching temperature, but also achieve the wet cleaning operation. It not only greatly reduces the manual operation steps, but also makes the heat caused by grinding controlled within the allowable range, effectively preventing the thermal deformation of PC plastic products. The specific operation is as follows:

ABS plastic is one of the five major synthetic resins: it has excellent impact resistance, heat resistance, low temperature resistance, chemical resistance and electrical performance. It also has the characteristics of easy processing, stable product size, good surface gloss, easy painting and coloring. It can also carry out secondary processing such as surface plating, electroplating, welding, hot pressing and bonding. It is widely used in machinery, automobile and electronics Electrical appliances, instrumentation, textile and construction industries, is a very wide range of applications of thermoplastic engineering plastics. ABS plastic is usually light yellow or milky white granular non crystalline resin.

Fireproof ABS is a kind of common fireproof material, which has a wide range of application at present. The main reason is that it is easy to produce and process, has fast fireproof effect, and has good gloss. Usually, the processing temperature of fireproof ABS is about 200 ℃. Because of the addition of other materials, the processing method and temperature of this raw material are different from those of pure fireproof ABS

PC is a non-polar crystalline plastic with low water absorption (about 0.03% ～ 0.04%). There is no need to dry it during injection molding (if necessary, it can be dried at 80 ～ 100 ℃ for 1 ～ 2H). The melting point of PC is 165 ～ 170 ℃, the decomposition temperature is 350 ℃, and the crystallization rate temperature is 120 ～ 130 ℃, The range of molding temperature is wide (205-315 ℃). The suitable MFR range of PC for injection molding is 2-15g / 10min. The fluidity of melt is good. The barrel temperature is controlled at 210-280 ℃. The nozzle temperature is 10-30 ℃ lower than that of the barrel Zui. When the product wall is thin and the shape is complex, the barrel temperature can be increased to 280-300 ℃. When the product wall thickness is large or the MFR of resin is high, the barrel temperature can be reduced to 200-230 ℃

Hollow board can be reused for many times, which can bring huge social and economic benefits. If the cost of each use of the tray is less than one tenth of that of the disposable tray, it can also improve the volume utilization rate of containers and inventory, improve the logistics efficiency, and greatly reduce the logistics cost. The standardization rate of pallets in China is far lower than that in developed countries. Therefore, we should vigorously promote the production of standardized PVC hollow boards and speed up the construction of supporting standards for standardized PVC hollow boards. The production of PVC hollow board in China basically adopts manual method, which has low production efficiency and unstable quality. With the expansion of demand, the manual production of European standard quality pallet is difficult to meet the requirements, and the mechanization of pallet production is imminent. At the same time, the general office of the State Council transmitted the opinions of the Reform Commission and other departments on speeding up the promotion of wood saving and substitution, clearly requiring all industries to speed up the implementation of wood saving and substitution technology, and make green environmental protection products.

PC board, also known as polycarbonate board and kapron board, is a kind of engineering plastic with excellent comprehensive performance, which has outstanding physical, mechanical, electrical and thermal properties. It is called "transparent plastic king". The PC board produced with it as raw material is divided into hollow board series (also known as cabron and unbreakable glass) and solid board series (also known as endurance board and transparent steel plate). It has the advantages of light transmission, anti ultraviolet, flame retardant and weather resistance. It is widely used in lighting and rain shelter of public and civil buildings, channel ceiling, overhead road sound insulation wall, top cover of shopping malls and plant greenhouses It is the most ideal light shed material in the world.

The material of PP hollow board determines its non-toxic, pollution-free, corrosion-resistant, waterproof and shockproof performance. In the process of use, it will not produce dust, and has a long service life, which is more than 4-10 times of that of corrugated board. It can be recycled and has the trend of gradually replacing paper corrugated board, which is mainly reflected in the product packaging. In addition, due to the light weight, good toughness, flexible size and low cost of PP hollow plate, PP hollow plate turnover box equipped with various parts has the tendency to replace injection molding turnover box.

High impact polystyrene, also known as hips, is a thermoplastic material made of elastomer modified polystyrene. The two-phase system composed of rubber phase and continuous polystyrene phase has developed into an important polymer commodity in the world, with good chemical stability and good equilibrium function. This kind of general-purpose product has a wide range of impact performance and processing performance, so it has a wide range of applications, such as in the automobile, equipment, electric products, furniture, household appliances, telecommunications, electronics, computers, disposable products, medicine, packaging and entertainment markets.

PC endurance board, also known as polycarbonate solid board, PC bulletproof glass, PC solid board and polycarbonate board, is made of high-performance engineering plastic polycarbonate (PC). It has the characteristics of impact resistance, impact resistance and unbreakable. It is tough, safe, anti-theft and bulletproof. It has good processability and strong plasticity.

Acrylic, organic glass, derived from acrylic (acrylic plastic), with good transparency, chemical stability and weather resistance, easy dyeing, easy processing, beautiful appearance, has a wide range of applications in the construction industry. Acrylic is often made into signs, corporate culture display boards, etc. Acrylic is a good plane material, printing on acrylic can print out concave and convex feeling, feel hierarchical, more visual effect.

It is a kind of special treated plexiglass with pure color and rich color. It can be said that it is a new generation of plexiglass. The light box made of acrylic not only has good light transmittance, but also is beautiful and smooth. It can give consideration to both day and night effects. Its service life is also quite long. In addition, acrylic plate can also be used with aluminum-plastic plate profiles, advanced screen printing, etc In general, acrylic board is the best outdoor advertising form to improve the store level and unify the corporate image.

It is a kind of special treated plexiglass with pure color and rich color. It can be said that it is a new generation of plexiglass. The light box made of acrylic not only has good light transmittance, but also is beautiful and smooth. It can give consideration to both day and night effects. Its service life is also quite long. In addition, acrylic plate can also be used with aluminum-plastic plate profiles, advanced screen printing, etc In general, acrylic board is the best outdoor advertising form to improve the store level and unify the corporate image.

Acrylic, also known as the special treatment of plexiglass, is a new generation of plexiglass products. The light box made of acrylic has the characteristics of good light transmission performance, pure color, rich color, beautiful and smooth, taking into account the two effects of day and night, long service life and no impact on the use. In addition, acrylic board and aluminum-plastic plate profiles, high Ji screen printing can be combined to meet the needs of businesses. Acrylic blister is a good outdoor advertising form to improve the level of business stores and unify the corporate image. "Acrylic" is a transliteration, English is acrylic. It's a chemical material. The chemical name is "PMMA", which belongs to polyacrylate, commonly known as "specially treated organic glass". In the application industry, acrylic raw materials are generally in the form of particles, plates, pipes, etc. Acrylic is transliterated from acrylic, which is the general name of acrylic acid and methacrylic acid chemicals. The acrylic plate is polymerized by methyl methacrylate monomer (MMA), that is polymethylmethacrylate (PMMA) plate and plexiglass. "Plexiglass" is derived from the trade name "orglas" (a kind of PMMA plate) and "organic glass" (also known as plexiglass).